|
| Title: |
CB&Q F3 132A |
| Description: |
Chicago Burlington & Quincy Railroad F3 132A westbound at Naperville, Illinois on August 3, 1965, Kodachrome by Chuck Zeiler. There are a couple of gentlemen on the bridge observing, and here's what transpired as best I remember: My friend, Ed DeRouin, explained to me that this was a local freight, and if there was a 'hot' car, they would set it out at Naperville, to be picked up by the East End Way Freight, and delivered to the customer, avoiding the usual setout at Eola, and adding a day to the delivery. The head-end brakeman is conferring with the crew, and they will set out a boxcar of newsprint paper (typically in a CP boxcar), that will be picked up and delivered to the newspaper printer in Downers Grove. However, there are some logistics to work out. This train has stopped short of Loomis Street, the only level crossing in Naperville, and will cut off here so as not to block the crossing. Unfortunately, the train has already activated the automatic crossing gates, and vehicular traffic has been stopped by the lowered gates. The switch to the siding is on the other side of Loomis Street, so someone will have to flag the crossing while the setout takes place. My guess is that the Fireman is getting drafted into crossing protection duty. |
| Photo Date: |
8/3/1965 Upload Date: 10/11/2012 2:30:13 PM |
| Location: |
Naperville, IL |
| Author: |
Chuck Zeiler |
| Categories: |
Roster |
| Locomotives: |
CBQ 132A(F3A) |
| Views: |
506 Comments: 0 |
|
|
|
| Title: |
CB&Q F3 132A |
| Description: |
CB&Q F3 132A westbound at Naperville, Illinois on August 3, 1965, photo by Chuck Zeiler. Built on EMD Order E957 during November 1948 (c/n 7050), it was traded as credit for a GP40 in January 1967. Order E957 was for 17 A/B/B/A F3 sets, and the delivery spanned three Phases of F3 production. Sets 122-125, delivered in April 1948 were Phase II F3's equipped with the new 36 inch unshrouded cooling fans. Sets 126-129 (Phase III) had louvers between the side porthole windows and lacked the "chicken wire". Sets 130-138 introduced the stainless steel Farr Air grills at the top side of the carbody, making the Phase IV F3's look much like a Phase I F7, except for the rectangular openings on the roof for the dynamic brakes instead of a 36 inch fan. |
| Photo Date: |
8/3/1965 Upload Date: 7/21/2008 8:45:46 AM |
| Location: |
Naperville, IL |
| Author: |
Chuck Zeiler |
| Categories: |
Roster |
| Locomotives: |
CBQ 132A(F3A) |
| Views: |
1008 Comments: 0 |
|
|
|
| Title: |
CB&Q F3 132A |
| Description: |
Chicago Burlington & Quincy Railroad F3 132A westbound at Naperville, Illinois on October 28, 1965, photo by Chuck Zeiler. This locomotive was built in November 1948 (c/n 7050) on EMD Order E-957 as the lead motor (as the CB&Q called their individual locomotives) of the four unit F3 set 132A-B-C-D. Delivered with drawbars and considered a single locomotive, it is termed a Phase IV F3, with the carbody configuration of a Phase I F7, except for the dynamic brake openings on the roof, which are rectangular openings instead of a 36" fan (on the F7). By the 1960's, the drawbars were replaced with couplers, and the F's were mixed freely to form the horsepower required for the job they were assigned. This particular motor was traded in on an order of GP40's in January 1967. No CB&Q F-units made it to the BN merger. |
| Photo Date: |
10/28/1965 Upload Date: 11/11/2008 12:05:07 PM |
| Location: |
Naperville, IL |
| Author: |
Chuck Zeiler |
| Categories: |
Roster |
| Locomotives: |
CBQ 132A(F3A) |
| Views: |
950 Comments: 0 |
|
|
|
| Title: |
CBQ 132A |
| Description: |
No exact date or location for this shot. |
| Photo Date: |
12/31/1967 Upload Date: 4/25/2024 8:23:20 PM |
| Location: |
Denver, CO |
| Author: |
Unknown |
| Categories: |
|
| Locomotives: |
CBQ 132A(F3A) |
| Views: |
61 Comments: 0 |
|
|
|
